Yamaha MT-10 2020 Owner's Manual page 19

Hide thumbs Also See for MT-10 2020:
Table of Contents

Advertisement

new cruising speed by pushing the
"SET–" side of the setting switch. If you
do not set a new cruising speed, when
you return the throttle grip, the vehicle
will decelerate to the previously set
cruising speed.
Deactivating the cruise control sys-
tem
Perform one of the following operations
to cancel the set cruising speed. The
"SET" indicator light will go off.
Turn the throttle grip past the
closed position in the deceleration
direction.
1
1. Deceleration direction
Apply the front or rear brake.
Disengage the clutch.
Push the power switch to turn off the
cruise control system. The "
tor light and the "SET" indicator light will
go off.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
Using the resume function
Push the "RES+" side of the cruise con-
trol setting switch to reactivate the
cruise control system. The traveling
speed will return to the previously set
cruising speed. The "SET" indicator
light will come on.
WARNING
It is dangerous to use the resume
function when the previously set
cruising speed is too high for cur-
rent conditions.
TIP
Pushing the power switch while the
system is operating will turn the system
off completely and erase the previously
set cruising speed. You will not be able
4-2
Special features
to use the resume function until a new
" indica-
cruising speed has been set.
Automatic deactivation of the cruise
control system
The cruise control system for this mod-
el is electronically controlled and is
linked with the other control systems.
The cruise control system will automat-
ically become deactivated under the
following conditions:
The cruise control system is not
able to maintain the set cruising
speed.
Wheel slip or wheel spin is detect-
ed. (If the traction control system
has not been turned off, the trac-
EWA16351
tion control system will work.)
The start/engine stop switch is set
to the "
" position.
The engine stalls.
The sidestand is lowered.
When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the "
" indicator light will go off
and the "SET" indicator light will flash
for 4 seconds, and then go off.
1
2
3
4
5
6
7
8
9
10
11
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt10l 2020Mt10lc 2020

Table of Contents