Replacing A Turn Signal Light Bulb; Replacing A License Plate Light Bulb - Yamaha VMAX VMX17 Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1. Screw
2. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205
1. Turn signal light bulb
2
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Periodic maintenance and adjustment
1
[ECA11192]
6-38
Replacing a license plate light
bulb
1. Remove the holding plate by re-
moving the bolts.
1. Holding plate
2. Bolt
2. Remove the license plate light unit
bolts.
EAU50453
2
6
1