Yamaha VMAX VMX17 Owner's Manual page 25

Coolant temperature meter
The coolant temperature meter indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load. If the coolant temperature meter
and the coolant temperature warning
indicator flash, stop the vehicle and let
the engine cool. (See page 6-42.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Select mode
The various functions of this multi-
function display are adjusted in the Se-
lect mode.
TIP
 The transmission must be in neu-
tral to change settings in this mo-
de.
 Shifting the transmission into gear
saves all settings made, then can-
cels the Select mode and displays
the Normal mode in all screens.
 Depending on the screen, pushing
"RESET" saves settings or can-
cels the Select mode to display
the Normal mode.
Push and hold "SELECT" and "RE-
SET" for three seconds to enter the Se-
lect mode.
ECA10022
The following items can be set/adjust-
ed in this mode:
 brightness
 shift timing indicator light
 clock
 stopwatch
 countdown clock
 system status
 maintenance counters
TIP
To return to the Normal mode, push
"SELECT" to scroll to " ", then push
"RESET".
3-10
Instrument and control functions
Adjusting the brightness
This function allows you to adjust the
brightness of the tachometer panel
and speedometer ("Meter panel"), the
tachometer needle ("Needle"), and the
multi-function display ("Display").
1. Push
"Brightness".
2. Push "RESET", then push "SE-
LECT" to scroll through the func-
tions and to highlight an item.
3. Push "RESET"; the brightness lev-
el segments for the selected item
starts flashing.
4. Push "SELECT" to highlight the
desired brightness level.
5. Push "RESET" to set the bright-
ness level.
"SELECT" to highlight
3