Results 1-7 of 7

Needles Threading the Machine Needles & Threading the Machine Timing of the Looper to the Needles Angle and Height for Installing the Looper

Timing of the Looper to the Needle Operation Panel and Control Box Operation Panel

Specifications Needles Needles & Threading the Machine To Adjust the Timing between the Upper and the Lower Shaft Timing of the Looper to the Needles

Needles & Threading the Machine Timing of the Looper to the Needles Positioning the Looper and the Looper Rocker

Table of Contents 針の取付け方 / Replacing the Needle

Installing the Position Detector Fx4406, Fx4412 Adjusting the Needle Stop Position Adjusting the Speed Controller and Air Pressure Adjusting the Thread Trimmer Position of the Movable Knife Threading & Adjusting the Thread Releaser For 6- to 12-Needle Machines