Cut An Outlined Section - Brother MFC-J680DW Web Connect Manual

Home > Outline, Scan, and Copy or Cut
an Outlined Section

Cut an Outlined Section

Related Models: DCP-J562DW/MFC-J680DW/MFC-J880DW/MFC-J885DW
After scanning the document, your machine prints the document without the outlined area(s).
1. Using a thick red pen or marker, outline the areas of the document that you want to cut.
2. Load your document.
3. Press d or c to display [Apps].
Press [Apps].
• If information regarding the Internet connection is displayed on the machine's LCD, read it, and then
press [OK].
• Occasionally, updates or announcements about Brother Web Connect's features will be displayed on
the LCD. Read the information, and then press [OK].
4. Press [Outline&Copy] > [Cut outlined area].
If information regarding [Cut outlined area] is displayed, read it, and then press [OK].
5. Change your [Print Quality] or your [Paper Size] if needed. Press [OK].
6. Press [OK].
The machine scans the document. If you are using the machine's scanner glass, follow the LCD instructions
to complete the scanning job.
7. Press [OK].
Related Information
• Outline, Scan, and Copy or Cut Parts of Your Documents
> Outline, Scan, and Copy or Cut Parts of Your Documents > Cut
43