Cut An Outlined Section - Brother DCP-L5500DN Web Connect Manual

Home > Outline, Scan, and Copy or Cut
an Outlined Section

Cut an Outlined Section

Related Models: DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/
MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6750DW/MFC-L6800DW/MFC-L6900DW
Outline areas of your document with a red line and use Outline and Cut to remove those areas from your final
scanned document.
1. Using a thick red pen or marker, outline the areas of the document that you want to cut.
2. Load your document.
3. Swipe left or right or press d or c to display the [Apps] option.
4. Press [Apps].
• If information regarding the Internet connection appears on the machine's LCD, read the information
and press [OK]. If you want to display this information again, press [Yes].
• Occasionally, updates or announcements about Brother Web Connect's features will appear on the
LCD. Read the information, and then press [OK].
5. Swipe left or right or press d or c to display [Outline&Copy], and then press it.
6. Press [Cut outlined area].
7. If information regarding [Cut outlined area] appears, read the information and press [OK]. If you want
to display this information again, press [Yes].
8. The Copy Settings screen will appear. Change your setting, if needed. Press [OK].
9. Press [OK].
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the printing job.
10. When the machine finished printing, press [OK].
11. Press .
Related Information
• Outline, Scan, and Copy or Cut Parts of Your Documents
> Outline, Scan, and Copy or Cut Parts of Your Documents > Cut
39