Register An Account On Your Brother Machine - Brother MFC-J680DW Web Connect Manual

Home > Before You Use Brother Web Connect
Your Brother Machine

Register an Account on Your Brother Machine

You must enter your Brother Web Connect account information and configure your machine so that it can use
Brother Web Connect to access the service you want.
• You must apply for Brother Web Connect access to register an account on your machine.
• Before you register an account, confirm that the correct date and time are set on the machine's control panel.
• You can register up to 10 accounts on your machine.
>> MFC-J460DW/MFC-J480DW/MFC-J485DW
>> DCP-J562DW/MFC-J680DW/MFC-J880DW/MFC-J885DW
MFC-J460DW/MFC-J480DW/MFC-J485DW
1. Press WEB.
• If information regarding the Internet connection is displayed on the machine's LCD, read the information
and press OK.
• Occasionally, updates or announcements about Brother Web Connect's features will be displayed on
the LCD. Read the information, and then press OK.
2. Press a or b to select the following:
a. Select the service with which you want to register. Press OK.
b. Select [Register/Delete]. Press OK.
c. Select [Register Account]. Press OK.
3. The machine will prompt you to enter the temporary ID you received when you applied for Brother Web
Connect access. Press OK.
4. Enter the temporary ID using the dial pad. Press OK.
An error message will appear on the LCD if the information you entered does not match the temporary ID
you received when you applied for access, or if the temporary ID has expired. Either enter the temporary ID
correctly, or apply for access again to receive a new temporary ID.
5. The machine will prompt you to enter the account name that you want to be displayed on the LCD. Enter the
name, and then press OK.
6. Do one of the following:
• To set a PIN for the account, press 1 (Yes). (A PIN prevents unauthorized access to the account.) Enter a
four-digit number, and then press OK.
• If you do not want to set a PIN, press 2 (No).
When the account information you entered is displayed, confirm that it is correct.
7. Press 1 (Yes) to register your information as entered.
8. Press OK.
Account registration is complete and your machine can now access the service.
9. Press Stop/Exit.
DCP-J562DW/MFC-J680DW/MFC-J880DW/MFC-J885DW
1. Press d or c to display [Web].
Press [Web].
> Set Up Brother Web Connect > Register an Account on
16