Brother MFC-J680DW Basic User's Manual page 65

Error Message
Paper Size
Mismatch
Paper Tray not
detected
Repetitive No
Paper Fed
Touchscreen Init.
Failed
Tray removed
Action
1. Check that the paper size you chose on the machine's display
matches the size of the paper in the tray.
See Related Information: Change the Paper Size and Paper Type
at the end of this section.
2. Make sure you loaded the paper in a Portrait position, by setting
the paper guides at the indicators for your paper size.
3. After you have checked the paper size and the paper position,
follow the on-screen instructions.
If you are printing from your computer, make sure the paper size you
chose in the printer driver matches the size of paper in the tray.
For more information, see the Online User's Guide: Print Settings
®
(Windows ) or Print Options (Macintosh).
Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being
inserted properly.
Pull the paper tray out of the machine, and remove the jammed paper
or foreign object. If you cannot find or remove the jammed paper, see
Related Information: Printer Jam or Paper Jam at the end of this
section.
Clean the paper pick-up rollers.
For more information, see the Online User's Guide: Clean the Paper
Pick-up Rollers.
The Touchscreen was pressed before the power on initialization was
completed.
Make sure nothing is touching or resting on the Touchscreen,
especially when plugging the machine in.
Debris may be stuck between the lower part of the Touchscreen and
its frame.
Insert a piece of stiff paper between the lower part of the Touchscreen
and its frame and slide it back and forth to push out the debris.
This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
See Related Information: Change the Check Paper Size Setting at the
end of this section.
49