Conair CS505LC Instruction Manual

STYLING WITH THE NEW EASY-GLIDE
CERAMIC-COATED PLATES
The plates of your new straightening iron have
an easy-glide ceramic-coated surface.
Hair glides easily over the surface of the plates
as you're straightening. The ceramic-coated
surface also helps smooth down flyaways
and frizzies. As you smooth each strand, heat
is evenly distributed so that the style you
create has a salon-perfect, silky smooth,
shining finish. Hair slips right off the plates
after it's straightened, and the ceramic
surface is easy to clean.
The ceramic technology is a pleasure to work
with because it makes styling your hair
easier and the results more professional.
USER MAINTENANCE
Your straightening
maintenance-free. No lubrication is needed.
Keep all vents and openings clear of dirt and
dust. If cleaning becomes necessary,
disconnect the unit from the power source,
allow to cool, and wipe exterior with a cloth.
If any abnormal condition occurs, unplug
the unit, allow it to cool, and return it for
repair to an authorized service representative
only. No repairs should be attempted by the
consumer.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance.
Damage will occur at the high flex point of
entry into the appliance, causing it to rupture
and short circuit. Inspect the cord
frequently for
immediately if damage is visible or if unit
stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug
connections. Do not wrap the line cord around
the appliance. Allow the cord to hang or lie
loose and straight at the point of entry into
the appliance.
iron is virtually
damage. Stop use