Conair CB890CSC Instruction Manual

FOR SPIRAL CURLS AND RINGLETS
Attach spiral sleeve to the 3/4" curling iron
barrel and attach 3/4" iron to power handle.
Work with 1" sections of hair, one at a time.
Hold iron horizontally, press the automatic
curl release button, and place the ends of
your hair under the shortened iron spoon.
Release the automatic curl release to clamp
hair in place. Wrap hair around the barrel,
twisting like a barber pole; continue toward
scalp. Leave hair wrapped for approximately
5-7 seconds. Unwind hair from barrel; open
the automatic curl release to unclamp hair.
Repeat procedure, styling small sections at
a time, layering the spiral curls as you go,
until all hair is curled.
USER
MAINTENANCE
Your curling iron is virtually maintenance-
free. No lubrication is needed. Keep all vents
and openings clear of dirt and dust. If
cleaning becomes necessary, disconnect
the curling iron from the power source and
wipe exterior with a damp cloth. If any
abnormal condition occurs, unplug the
curling iron, allow it to cool, and return it for
repair to an authorized service center only.
No repairs should be attempted by the
consumer.
CAUTION
NEVER allow the power supply cord to be
pulled or twisted. Never wrap the cord
around the curling iron. Damage will
occur at the high flex point of entry into
the curling iron, causing it to rupture and
short. Inspect the cord frequently for
damage. Stop use immediately if
damage is visible or if unit stops or
operates intermittently.
STORAGE
When not in use, your appliance should
be disconnected and stored in a safe, dry
location out of reach of children. Do not
jerk or strain cord at plug connections. Do
not wrap the line cord around the
appliance. Allow the cord to hang or lie
loose and straight at the point of entry
into the appliance.