Conair ProShine CS64C User Manual

GET TO KNOW YOUR
STRAIGHTENING IRON
1 / " (28.5mm) Extra
1
8
Long Titanium &
Tourmaline Ceramic
Straightening Plates
Removable
silicone
attachment
LED light
Low/Med/High
Temperature
Settings
On/Off power button
Dual voltage
Automatic shut off
Professional line cord
*Unit will not reach stabilized temperatures within 30 seconds
Cool tip
Instant Heat –
30-Second
Heat-up*
USER
MAINTENANCE
Your straightening iron is virtually maintenance-free.
No lubrication is needed. Keep all vents and open-
ings clear of dirt and dust. If cleaning becomes
necessary, disconnect the unit from the power source,
allow to cool, and wipe exterior with a cloth. If any
abnormal condition occurs, unplug the unit, allow
it to cool, and return it for repair to an authorized
service representative only. No repairs should be
attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled,
twisted, or severely bent. Never wrap the cord
tightly around the appliance. Damage will occur at
the high flex point of entry into the appliance, caus-
ing it to rupture and short circuit. Inspect the cord
frequently for damage. Stop use immediately if
damage is visible or if unit stops or operates inter-
mittently.
STORAGE
When not in use, your appliance is easy to store.
Allow appliance to cool, then simply put back in the
box and store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug connec-
tions.