Advertisement
BIKINI TRIMMER
COMB ATTACHMENT
1. Place the comb attachment on the bikini
trimmer head and press down (see Figure 4).
2. Push up the comb attachment to release.
(see Figure 5).
Fig. 4
FACIAL TRIMMER
COMB ATTACHMENT
1. Insert the comb attachment on the slot "L"
for 3.2mm cutting length or on the slot "S" for
1.2mm cutting length (see Figure 6).
2. Push up the comb attachment to release.
(see Figure 7).
Fig. 6
ASSEMBLING THE
FACIAL TRIMMER WITH
THE FACIAL HEAD
1. Align the locking of the
Facial trimmer with the
hook of the Facial trimmer
head (see Figure 8).
Fig. 5
Fig. 7
Fig. 8
2. Slightly close the trimmer on the trimmer
head (see Figure 9).
3. Push the lock of the trimmer head (see
Figure 10) to complete the assembly.
4. Reverse the above steps for disassembly of
the Facial trimmer.
Fig. 10
CLEANING OF THE SHAVER HEAD
1. Press down the button on both sides.
2. Take out the shaver and trimmer head.
3. Take out the cutter set from the shaver head
(see Figure 11).
4. Use the cleaning
brush provided to
clean the cutter set
(see Figure 12).
Fig. 12
REPLACEMENT PARTS:
These shavers use the following replacement
parts, which can be ordered directly from
Conair by calling customer service at
1-800-472-7606
Replacement Foil and Cutters
Cleaning Brush
Charging Base
Fig. 9
Fig. 11
Advertisement
