Advertisement
6. As your skin may be sensitive after shaving,
test your moisturizer on a small patch of skin
and wait to see if irritation occurs.
7. Cleaning: After each use you will need to
clean the shaver head to ensure continued per-
formance.
8. Move the power on/off switch to the OFF
position.
9. Remove the shaver head from the handle.
10. Remove the foil head assembly from the
shaver head by pushing on the two side
buttons and pulling the foil away from the head.
11. Using the supplied cleaning brush, gently
brush the hair away from the cutter. Blow the
hair off the foil, do not use the brush on the
foil, it will cause damage.
12. The head may also be rinsed under water.
Be sure to allow both to dry before using.
To maintain the best cutting performance, be
sure to replace the foil head and cutter every six
months of regular use. Contact Conair Customer
Service to order the replacement parts.
TRIMMING
1. Be sure the handle is fully charged.
2. Attached the trimming head as described in
"Changing the Heads" section.
3. To fully remove hair or to outline the bikini
area, use the trimmer without the attachment
comb.
4. When removing hair, gently move the
blades against the direction of growth.
5. To outline, place the blades perpendicular to
the skin surface and apply the blades to the
edge of the hair. Use the blades to create the
desired outline.
Advertisement
