Record Setup; Record Configuration - Maxtor 4Channel Stand-alone DVMR User Manual

5-4. RECORD SETUP

This is the most important configuration of the DVR.
Enter into SYSTEM MENU-RECORD SETUP
and press the [ENTER] button.

1) RECORD CONFIGURATION

Use direction button to move and [
(1) OVERWRITE : Set overwrite or stop recording when
(2) MULTIPLEX
- DUPLEX : Playback & Ethernet
- TRIPLEX : Playback & Recording & Ethernet
※ Note: DUPLEX MODE is recommended to playback
the images at a maximum frame rate.
But, it makes DVR not to record during search.
(3) QUALITY : Set recording picture quality.
Actually it is fixing maximum data size of
image for each picture quality in 5 steps
as follows.
-
BASIC
- NORMAL
- ENHANCED
- FINE
Default quality set by manufacturer
- SUPER FINE:
In Emergency recording mode, recording quality is
SUPER FINE.
To send more images via IP network and longer recording
time, set QUALITY at NORNAL or ENHANCED and
record at 360x240 or 360x120.
※ Data size of image in PAL system is a little bigger than NTSC system, but the total recording time
is same as in NTSC system.
(4) RESOLUTION : Set recording resolution.
- 60 ips at 720x240(NTSC) , 50 ips at 720x288(PAL)
- 120 ips at 360x240(NTSC) , 100 ips at 360x288(PAL)
- 240 ips at 360x120(NTSC) , 200 ips at 360x144(PAL)
※ Images recorded in 360x240(360x288) or 360x120(360x144) are always played in quad mode.
It is not possible to see those images in full screen mode in playback.
Recording in half or quad resolution is recommended for higher recoding speed, and also to send
more images via IP network.
(5) RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.
(6) RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.
(7) CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.
Set record speed (skip rate)
- 1/1x, 1/2x, .......... 1/999x record speed
- ex: 1/2x ) R->S->R->S...
- ex: 1/4x ) R->S->S->S->R->S->S... ( R : RECORD
- ex : If record resolution is set at 360x240, 1/1x = 120 ips, 1/2x = 60 ips, 1/3x = 40 ips, etc.
-
] [+] button to set value.
the HDD is full.
RECORD CONFIGURATION
SCHEDULE SETUP
HOLIDAY SETUP
SELECT MENU : ▲▼, & [ENTER]
OVERWRITE
MULTIPLEX
QUALITY
RESOLUTION
RECORD IN ALARM
RECORD IN MOTION
CONTINUOUS RECORD
SELECT MENU : ▲▼, CHANGE VALUE : + -
- ex: 1/3x ) R->S->S->R->S->S->R...
S : SKIP )
27
CHAP. 5 Set Up
RECORD SETUP
RECORD CONFIGURATION
TRIPLEX
ENHANCED
60IPS 720*240
ON
1/1X
1/1X
1/1X