Interval Setup; Alarm Setup - Maxtor 4Channel Stand-alone DVMR User Manual

4) INTERVAL SETUP

Set the switching time interval for SEQ or PIP
function.(1 sec. ~ 99 sec.)
FULL SCREEN : set the sequencing switch time interval
in live full screen.
PIP SCREEN : set the sequencing switch time interval
of PIP window.
EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.

5) ALARM SETUP

Set type of alarm sensors connected to DVR unit.
N.O represents Normal Open type and N.C Normal Close type.
ALARM SETUP
CHANNEL
ALARM INPUT
DURATION
N.O ................................ NORMAL OPEN
N.C ................................ NORMAL CLOSE
....................................... DISABLE
SELECT : ▲▼, CHANGE VALUE : + -
1) ALARM INPUT : Select type of alarm sensor connected to DVR unit (N.O or N.C).
Use direction button and [-] [+] button to set.
DISABLE represents not to use alarm sensor connected to DVR.
2) DURATION : Set the duration of alarm when an ALARM is activated. (0 sec. ~ 300 sec.)
If EVENT UPDATE TIME is set at 20 sec, only following event happened
20 sec or more than 20 sec later previous event shall be listed in EVENT LIST.
CH1
N.O
005
25
INTERVAL SETUP
SWICHING INTERVAL
FULL SCREEN
PIP SCREEN
EVENT RECORD
EVENT UPDATE TIME
SELECT ▲▼◀▶, CHANGE VALUE : + -
CHAP. 5 Set Up
: 01 SEC
: 01 SEC
: 01 SEC