Display Setup; Screen Display; Monitor Setup - Maxtor 4Channel Stand-alone DVMR User Manual

5-2. DISPLAY SETUP

Setting up parameters for monitor and display on screen.
Enter into SYSTEM MENU-DIPLAY SETUP.
DISPLAY SETUP

SCREEN DISPLAY

MONITOR SETUP

SELECT MENU : ▲▼, & [ENTER]
1) SCREEN DISPLAY
1
3
2) MONITOR SETUP
VGA SETUP : VGA option card enables to connect TFT LCD monitor or CRT type PC monitor to
DVR unit. To connect TFT LCD monitor or CRT type PC monitor to DVR unit, select
resolution as follows using [+] or [
[ENTER] button then the DVR unit will set VGA resolution automatically.
VGA option card supports following resolution, and choose best resolution that
match TFT LCD monitor or CRT type PC monitor to be connected to DVR unit.
- 640X480 / 60Hz
- 800
- 1024X768 / 60Hz
COLOR BAR TEST : Adjust color tone of monitor.
2
4
5
600 / 60Hz
X
LIVE
PLAYBACK
VGA SETUP
COLOR BAR TEST
Setting up the screen display in LIVE mode
and PLAYBACK mode.
Select the sub-menu which you would like to set using
direction buttons and then change ON/OFF with
[ENTER] button.
1. TIME/DATE : Display time & date
2. DVR STATUS : Display system setting status
3. ICON DISPLAY : Display function setting status
4. REC/PLAY BAR : Display record / playback status
5. CAMERA TITLE : Display camera title
−
] button. After setting the below option, press
- 640X480 / 75Hz
- 800X600 / 75Hz
- 1024X768 / 75Hz
21
CHAP. 5 Set Up
※ NOTICE : In the booting process,
DVR unit with VGA option
card takes some seconds
more to set parameters.