In The Home Close To Wi-Fi Router - Genie Aladdin Connect Quick Setup Manual

STEP 1

In the Home close to Wi-Fi Router:

1. Remove mounting bracket from back of DCM. FIG.A,
2. Plug Aladdin Connect™ into wall outlet with Power Pack.
FIG. B.
3. Plug power pack into DCM controller.
DCM
FIG.A
NOTE: Customers using control apps from other vendors and NOT
using the Aladdin Connect™ app to control this system will need to
visit www.GenieCompany.com/AladdinConnect for specific Wi-Fi
instructions.
FIG.B
STEP 2
In the Home close to Wi-Fi Router:
Download the Aladdin Connect™ app.
1. Scan the QR code below or visit www.GenieCompany.
com/AladdinConnect to start the setup of the Aladdin
Connect™ device.
2. Follow the on-screen menus to create an account and
program system prior to wiring in the garage.
3. At the installation prompt, disconnect
power pack and move system to the
garage.
Scan for app.
Apple and the Apple logo are trademarks
of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark
of Apple Inc.
Installation Prompt