Unpacking; Installation; Breaking In; Setting Up The Remote Control - Canton Digital Movie 900 Operating Instructions Manual

English

Unpacking

unpack the box carefully and check that all the following
parts are present:
• 1x Canton Soundbar DM 900
• 1x Wireless Subwoofer
• 1x Remote control inc. battery
• 2x Mains cable
• 1x Optical digital audio cable
• 1x Stereo RCA-cable
• 1x Digital RCA-cable

Installation

in case of wall-mounting the Soundbar should be positioned
below the flat-screen tV. in connection with a free-standing
flat-screen tV it should be positioned in front of the flat-screen
tV. the subwoofer can be set up anywhere in the room.
However, the distance between the Soundbar and the sub -
woofer should not exceed 10 m.
30

Breaking in

Maximum sound quality requires a breaking-in
time of 15 – 20 operating hours.
• During this time operate the loudspeaker at
normal volume
• Avoid high noise levels
• Listen to a variety of music
Setting up the
remote control
the remote control comes with a battery already installed.
Simply remove the protective film to activate. When replacing
the battery ensure that it is correctly inserted according to
the polarity markings (+/–). Only use the battery specified
for this system (CR 2032).
Note
the battery provided is intended for test use and may there-
fore have a shorter lifespan.
DM Soundbar
open
closed
CR 2032
Remote control

Connection Terminal

SUB OUT
Service
Soundbar DM 900
SUB IN
[WiReD]
Connections DM
7
Power inlet
1
Output – ext. subwoofer
2
input – tV (optical)
SUB IN - MODE
3
WIRELESS WIRED input – DVD (coaxial)
4
[POWeR AutO] [POWeR AutO]
input – AuX (analogue)
5
WIRED
[POWeR ON]
Jack service (Canton)
8 6
input – SuB iN (wired)
7
input selector switch
8
(wireless/wired)
6
SeRViCe
100-120V~ or 200-240V~ 50/60Hz
MAX. 200W STANDBY <0.5W
1
Subwoofer DM 900
English
31