GE Consumer & Industrial GE AIR 107 Owner's Manual And Installation Instructions page 11

Table 2
Indoor terminal
Model
GE AIR 107 / GE AIR 109
GE AIR 112 / PRO AIR 107
PRO AIR 109 / PRO AIR 112
GE AIR 116 / GE AIR 121
GE AIR 218 / GE AIR 224
PRO AIR 218
GE AIR 326 / GE AIR 428
PRO AIR I109 / PRO AIR I112
20
Outdoor terminal
Cable wire
block
N
Blue
2 black
4
violet
5
orange
ground yellow / green ground (on chassis)
N
blue
2 black
3
brown
4 violet
5
orange
N
blue
2 black
3
brown
ground yellow / green ground (on chassis)
-
brown
- blue
- ground
yellow / green
N(1)
blue
2 brown
3 black
ground ground (on chassis)
yellow / green
-
brown
- blue
- ground
yellow / green
N(1) blue
2
black
3 brown
ground ground (on chassis)
yellow / green
NOTES:
1. All electrical work must be performed
by qualified personnel according to
block
local regulations and this manual.
2. The exclusive power line with rated
N
voltage must be used.
2
3. Circuit breaker must be installed
4
between the air-conditioner and the
power line.
5
4. Make sure the specified circuit breaker
is used.
5. If the power supply cord of the unit is
N
damaged, it must be replaced with a
2
special cord available from the
3
manufacturer or its service agent.
6. The diameter of the power connecting
4
cable must be equal to or exceed the
5
specified value to operate the air-
conditioner safely.
N(1)
7. Wiring work must conform to national
2
standards.
3
L
N
N
L1
L2
L
N
N(1)
2
3
21