MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem User Manual page 12

&D2
&D3
&F_ &F
&G_ &G0
&G1
&G2
&K_ &K0
&K3
&K4
&L_ &L0
&M_ &M0 Asynchronous operation
&S_ &S0
&S1
&T_ &T0
&T1
&T3
&T6
&V &V0
&W_ &W0 Stores the active profile as Profile 0
&W1 Stores the active profile as Profile 1
&Y_ &Y0
&Z n =x n =0-3 Store phone number x into non-volatile
%E_ %E0 Disable auto-retrain
%E1 Enable auto-retrain
%X_ %X0 Disable re--dialing suppression
%X1 Enables re-dialing suppression
#CID=n n=0
n=1
n=2
#CID?
#CID=?
3.5 MNP/V.42/V.42bis Commands
%C_ %C0 Disable MNP Class 5 and V.42bis data
DTR toggle
Modem hangs up, returns to the
Command Mode after DTR toggle
Resets modem after DTR toggle
Recall factory default configuration
Guard tone disabled
550 Hz guard tone
1800 Hz guard tone
Disable flow control
Enable RTS/CTS hardware flow
control
Enable XON/XOFF software flow control
Modem is set up for dial-up operation
Force DSR Signal High (ON)
DSR off in command mode, on in on-line
mode
Ends test in progress
Perform Local Analog Loopback Test
Perform Local Digital Loopback Test
Perform a Remote Digital Loopback Test
Displays Active Profile
Configuration Profile 0 active upon
Power on or reset
RAM
Disable Caller ID
Enables Caller ID with formatting (date,
time, number, name)
Enables Caller ID without formatting
Displays current Caller ID mode
Returns Caller ID capabilities of modem.
10