Universal Remote Control UR3-SR3 Operating Manual page 11

device LED will blink twice to confirm that
the memory button has been erased.
H. Assigning the Volume and Mute keys
H. Assigning the Volume and Mute keys
to a Different Device
to a Different Device
By default, the VOL5, VOL6 and MUTE keys
operate through your TV. If you would like those
keys to operate those functions on a different
device, follow these steps.
STEP1 Press the [OK/SEL] button and [CBL]
button simultaneously for three seconds.
The device LED will turn on for 20
seconds. The next step must be
performed while the LED is on.
STEP2 Press the [VOL 5] button. The device
LED will blink.
STEP3 Press the [DEVICE] button corresponding
to the device that you would like the
volume and mute buttons to control. The
device LED will blink twice to confirm the
programming.
Example : If you wish to have the volume and
I. Assigning the Channel keys to a
I. Assigning the Channel keys to a
Different Device
Different Device
By default, the CH5, CH6, NUMERIC and LAST keys
operate through your Cable Box. If you would like
those keys to operate those functions on a different
device, follow these steps.
STEP1 Press the [OK/SEL] button and [CBL]
button simultaneously for three seconds.
The device LED will turn on for 20
mute keys operate your Cable Box,
press the [CBL] button in Step3.
9