Using The Network Usb Hub Control Center - Belkin F5L009UK Setup Manual

3. Using the Network USB Hub Control Center

Setting and Configuring the Connection Settings
for Automatic Connection to a Device
You can connect to a device by double-clicking the device on the list,
or by selecting it on the list, and then clicking "Connect", on the bottom
of the screen. To disconnect a device, just double-click it on the list, or
select it and then click "Disconnect", on the bottom of the screen
: If there is more than one computer on the network sharing the
WARNING
Network USB Hub, it is not recommended to automatically connect to a
device because only one computer can connect to a device at a time.
You can set your computer to automatically connect to a device on the Network USB Hub.
: This only works if the device is not already connected to
NOTE
another computer.
Using the Network USB Hub Control Center
Connected to this computer
– Currently being used
Unavailable – Removed
from the device
Not Connected – Available
Not Connected – Not available
7