Asus A68HM-F Web Manual page 46

2.5.6 DIGI+ VRM
CPU Load Line Calibration [Auto]
Load‑line Calibration is defined by AMD VRM specifications and affects CPU voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load‑line calibration
would get higher voltage and better overclocking performance, but increase the CPU and
VRM thermal. This item allows you to adjust the voltage range from the following percentages
to boost the system performance: 0% (Regular), 60% (Medium), 80% (High), and 100%
(Extreme). Configuration options: [Auto] [Regular] [Medium] [High] [Extreme]
The actual performance boost may vary depending on your CPU specifiation.
CPU/NB Load Line Calibration [Auto]
Allows you to select the CPU/NB Load‑Line Calibration mode. Configuration options: [Auto]
[Regular] [High] [Extreme]
CPU Current Capability [100%]
This item provides wider total power range for overclocking. A higher value brings a
wider total power range and extends the overclocking frequency range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
CPU/NB Current Capability [100%]
This item provides wider total power range for overclocking. A higher value brings a
wider total power range and extends the overclocking frequency range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
CPU Power Phase Control [Standard]
Phase number is the number of working VRM phase. Increasing phase number under heavy
system loading to get more transient and better thermal performance. Reducing phase
number under light system loading to increase VRM efficiency.
[Standard]
[Optimized]
[Extreme]
[Manual Adjustment]
DO NOT remove the thermal module when switching to Extreme and Manual Adjustment.
The thermal conditions should be monitored.
CPU Voltage Frequency [300]
Switching frequency will affect the VRM transient response and component thermal. Setting
a higher frequency gets faster transient response. Use the <+> and <‑> keys to adjust the
value. The values range from 200k Hz to 350k Hz with a 50k Hz interval.
CPU Power Duty Control [T.Probe]
[T.Probe]
[Extreme]
DO NOT remove the thermal module while changing the DIGI+VRM related parameters.
The thermal conditions should be monitored.
2-16
Proceeds phase control depending on the CPU loading.
Loads the ASUS optimized phase tuning profile.
Proceeds the full phase mode.
Allows manual adjustment.
Maintains the VRM thermal balance.
Maintains the VRM current balance.
Chapter 2: BIOS information