Charging: The Lwd400; Rechargeable Model Lwd400; Before Shaving - Conair LWD400RCSC Instruction Manual

CHARGING: THE LWD400

Before your first shave, charge the shaver
for 16 hours to use for up to 25 minutes,
or after six months of non-use. After initial
charge, it should take 16 hours to recharge
your shaver. Then recharge the shaver as
needed.
To charge the LWD400, plug the power cord
in an AC outlet (120V) and make sure the
charging stand is placed on a firm, level
surface at all times. The foils are extremely
thin and precisely crafted. Do not push on the
foils when inserting the shaver into the charg-
ing stand. For extra protection, keep the
blade guard on while handling the unit in
the charging stand as well as when not in
use.
1. Turn the shaver switch off. If the switch
is not in the off position, the shaver will not
charge.
2. While holding the charging stand with
one hand, plug the shaver firmly into the
charging stand with the other hand. Make
sure the shaver is completely inserted.
3. Keep the shaver switch in the OFF
position while charging.
4. The charging indicator light will stay on
while the shaver is in the charging stand
and is charging.
5. A fully charged shaver will give approxi-
mately 25 minutes of shaving time.

Rechargeable Model LWD400

Congratulations! Satiny Smooth legs are just a
shave away with your new Conair wet/dry
rechargeable women's shaver. This shaver can
be used with shaving cream, which provides a
smoother, closer shave, or it can be used dry
as a regular shaver. Because the shaver is fully
submersible, you can conveniently shave in
the shower or in the tub. And the shaver is
easy to clean; simply rinse the cutting heads
under a faucet, using warm or cold water (DO
NOT USE HOT WATER. IT CAN DESTROY THE
SHAVER'S SEALS.)
CAUTION
Do not immerse any part of the charging
stand or cord in water.
Do not try to plug the charging stand into
an AC outlet while your hands are wet.
The outer foils and inner blades are deli-
cate and must be handled very carefully.

BEFORE SHAVING

1. Before wet shaving, you may wish to
prepare your legs and underarms with shav-
ing cream or soap. If a soapy lather is applied
to the skin, the shaver will glide smoothly
over the skin and clean away oil residue while
at the same time removing hair. Caution: DO
NOT use shaving gels, as these products can
clog your shaver foils.
2. When dry shaving, be certain that your
skin is clean. If you have sensitive skin, you
may want to apply talcum powder before and
after you shave.
3. Clean your shaver after each use. This will
insure the best performance. (Please refer to
"How to Clean Your Shaver" section for further
instructions.)
4. Although the shaver is waterproof, do not
submerge it under water for extended periods
of time.
5. For your added convenience, we have