Related Manuals for IOGear GUWA100U M0425
Summary of Contents for IOGear GUWA100U M0425
- Page 1 Installation Installation Installation Guide Wireless USB Host Adapter GUWA100U PART NO. M0425...
-
Page 3: Welcome
To better serve you, IOGEAR offers an array of additional USB 2.0, USB 1.1, FireWire, KVM, and other peripheral products. For more information or to purchase additional IOGEAR products, visit us at www. -
Page 4: Table Of Contents
Table of Contents Driver Installation Welcome Advanced Setting Introduction Frequently Asked Questions Features Technical Support Requirements Limited Warranty Package Contents Federal Communication Commission Installation (FCC) Statement Hardware Preparation Contact Software Installation... -
Page 5: Introduction
Introduction IOGEAR’s Wireless USB allows you to connect your USB peripherals and computer with all the ease and speed of USB 2.0 without the use of USB cables and extenders between the PC and your Wireless USB Hub. Gain all of the advantages of USB 2.0 without the hassle of wires cluttering up your workspace. Plug your USB devices into the Wireless USB Hub and within seconds you have wireless access and control over the devices with no delay, purely plug-and-play. -
Page 6: Features
Features • Wireless USB 2.0 speed through UWB medium • Simple hardware interface • Easy Installation has you connected in minutes • Solid 3-year limited warranty... -
Page 7: Requirements
Requirements • PC System requires Windows XP (with SP2 and .NET Framework 2.0) or Windows Vista • Available USB ports • Software requires Windows and CD-ROM drive... -
Page 8: Package Contents
Package Contents 1 x Wireless USB Host Adapter GUWA100U 1 x Extension / Swivel Adapter 1 x Software CD (with Electronic Manual) 1 x Quick Start Guide... -
Page 9: Installation
Installation Before we get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces. -
Page 10: Hardware Preparation
Hardware Preparation 1. Do not connect the Wireless USB Host Adapter to your computer until you are instructed to do so later in the section titled “Driver Installation”. 2. Remove the Wireless USB Host Adapter, extension/swivel adapter, and the installation CD from the package. -
Page 11: Software Installation
Software Installation Please always check www.iogear.com for the latest To install the UWB software, insert the included drivers. CD into your computer. The following menu should appear automatically. If not, select “Run CD_Start.exe” OR navigate to the CD Rom IMPORTANT NOTE:... - Page 12 Microsoft .NET Framework 2.0 is required by the UWB software. Once you begin the software installation, if .NET Framework 2.0 is not installed on your PC, the software will automatically prompt you to install before proceeding to the UWB software installation. If .NET Framework 2.0 is not installed, the following screen will appear.
- Page 13 The fi rst window will explain that WiCenter The following window will display the status software is going to be installed on your of the installation process. Depending on the computer, this software will control the devices particular system, this may take a few minutes so select - Next.
- Page 14 The following window will request that you The window shown below allows you to select agree to the License Agreement before pro- where the fi les for WiCenter are installed and ceeding with installation, select Yes. stored. Once you have made your selections select - Next.
- Page 15 The following window confi rms that you are Once you have selected Next the WiCenter approving installation, select - Next. software will begin installation and show the status in a window similar to the one shown below.
- Page 16 Once all the software has been installed properly, you will see a window similar to the following stating installation has completed. Select “Finish” to fi nalize the software installation. After the software has fully installed, restart the PC.
-
Page 17: Driver Installation
Driver Installation Verify that WiCenter is running by double-clicking Verify that the Wireless USB Host Adapter is con- on the WiCenter icon created on the desktop dur- nected to the extension/swivel adapter provided ing the installation process. in the box. The fi... - Page 18 Wireless USB newly installed IOGEAR Wireless USB Host Adapter. devices in range. If you are using IOGEAR’s GUWH104 Hub then you will need to follow the instructions included with that device or continue with the Wireless USB...
- Page 19 The Wireless USB Hub should now be visible and if you connect any devices to the Wireless USB Hub you will be able to view them through the dropdown menu shown to the right or through My Computer. In order to view devices connected to the Wireless USB Hub click the [+] and it will bring a dropdown of all peripherals currently connected and available.
-
Page 20: Advanced Setting
Advanced Settings The advanced settings of WiCenter allow you to make changes related to the Channel that data is being transmitted on. The following shows the Advanced Settings tab which can be accessed by clicking on Settings My Wireless USB Radio Settings, and then selecting the Advanced tab on the window that appears. - Page 21 Once a channel has been changed manually, the If the Channel needs to be changed manually, the following fi gure shows the available channels following window will appear indicating that the for selection. connection will be lost to the Wireless USB Hub while the channel is changed.
-
Page 22: Frequently Asked Questions
Frequently Asked Questions Problem: WiCenter UWB Software reports errors when trying to use the Wireless USB Host Adapter and Wireless USB Hub on Windows XP operating system. Solution: Verify that Service Pack 2 (SP2) has been installed on your PC. Problem: No LEDs lighting up on the Wireless USB Hub. - Page 23 Wireless USB Hub and wait for the wireless connection. If still blinking, check the History window on WiCenter which will indicate if the IOGEAR Wireless USB Hub was associated. If not, associate the Wireless USB Host Adapter with the Wireless USB Hub using the mini-USB cable provided.
- Page 24 Problem: Wireless USB Hub will not associate with the Wireless USB Host Adapter. Solution: Verify that the WiCenter software is running by double-clicking on the WiCenter icon created on the desktop during the installation process. If the WiCenter icon is in the System Tray, this can be double-clicked in order to bring up the WiCenter user interface.
- Page 25 Problem: The IOGEAR Wireless USB Hub does not show up in the Console window when connected wirelessly to the Wireless USB Host Adapter.
-
Page 26: Technical Support
23 Hubble Irvine, CA 92618 You may also reach us online at www.iogear.com/support 24 hours a day. Please be ready to give a brief description of the problem, and what you were doing when the problem occurred, before calling Service Support. - Page 27 1. What is the purchase date and serial number of the product? 2. Were any messages displayed on the screen when the error occurred? If so, what was the exact wording of the message? 3. What type of Computer are you using? 4.
-
Page 28: Limited Warranty
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDEN- TAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantabil- ity, or fi... -
Page 29: Federal Communication Commission
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations). -
Page 30: Contact
All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this... - Page 31 The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fi t lifestyles. By integrating products with the latest scientifi c developments, IOGEAR’s solutions enhance the life of end-users. © 2007 IOGEAR, INC.