Related Manuals for IOGear M1063
Summary of Contents for IOGear M1063
- Page 1 Installation Guide Installation Wireless USB to VGA Adapter GUW2015V PART NO. M1063...
-
Page 3: Table Of Contents
Table of Contents System Requirements Important Information Package Contents Device Overview Wireless USB VGA Software Installation Cable Association with the Wireless USB Enabled PC Connecting Wireless USB VGA Adapter Wireless USB VGA Display Settings Wireless USB VGA Adapter in wired mode Frequently Asked Questions Technical Specifications Limited Warranty... -
Page 4: System Requirements
System Requirements - Microsoft Windows ® XP 32-bit (Service Pack 2) - Microsoft Windows ® Vista ® - Minimum CPU requirement: 2GHz (single core), memory: 1GB* - Wireless USB enabled PC (embedded or via Wireless USB Host Adapter) - USB 2.0 Compliant hardware and system - Display with VGA port (VGA cable not included) * In order to support 720p video, minimum system requirements CPU: 2GHz (single core), RAM: 1GB. -
Page 5: Important Information
Important Information Before you get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces. -
Page 6: Package Contents
Package Contents 1 x Wireless USB to VGA Adapter (for Monitor/TV/Projector) 1 x USB 2.0 A to mini-B Cable (3 ft.) 1 x Velcro fabric hook-and-loop fastener 1 x Power Adapter (full range) 1 x Quick Start Guide 1 x Registration / Warranty Card 1 x Installation CD (with User Manual) -
Page 7: Device Overview
Device Overview Wireless VGA Adapter Wireless VGA Adapter 5 6 7... - Page 8 Wireless VGA Adapter Wireless VGA Adapter 1. VGA : VGA Activity Indicator LED is solid when display cable is connected LED is blinking when data is being transferred 2. PWR: Power Indicator LED is solid when power is applied 3. 1 – 2 – 3: Status Indicator Single* solid light: device is wirelessly connected to the selected Wireless USB Host Adapter Single* slowly blinking light: device is searching for...
-
Page 9: Wireless Usb Vga Software Installation
Wireless USB VGA Software Installation Please always check www.iogear.com for latest drivers. IMPORTANT NOTE: If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed on your PC before installing the Wireless USB VGA Adapter software. - Page 10 Step 3 – Choose installation method. The next screen will let you choose whether you want to install the latest software from the IOGEAR website or if you want to install the software directly from the installation CD.
- Page 11 If selecting Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website where you’ll find the most up-to-date software. Once you download the software, double-click on the .exe file to begin the installation process.
-
Page 12: Cable Association With The Wireless Usb Enabled Pc
Cable Association with the Wireless USB Enabled PC In order to establish a secure wireless connection between the Wireless USB enabled PC and the Wireless USB VGA Adapter, you will need to go through the cable association process. If you have a removable Wireless USB host adapter, please make sure it is plugged in now. - Page 13 Then use the included USB 2.0 A to mini-B cable to connect the Wireless USB VGA Adapter to your PC.
- Page 14 Windows will detect that a new device has been connected. This will automatically install the necessary drivers and start the Wireless USB Association process. Once the association process has been successfully completed, you will see the wireless connection status showing Association Successful. (Wording may vary depending on which software comes with your Wireless USB Host adapter).
- Page 15 The host adapter manager utility will display the Wireless USB VGA icon which shows the status link (signal strength ) when connected. If the Wireless USB VGA adapter is not connected, then the Wireless USB VGA icon will be grayed out.
-
Page 16: Connecting Wireless Usb Vga Adapter
Connecting Wireless USB VGA Adapter Please make sure the PC is Wireless USB enabled either with embedded Wireless USB solution or with the Wireless USB Host Adapter plugged in before you connecting the Wireless USB VGA Adapter. Verify that the antenna on the Wireless USB VGA adapter is securely attached and pointed in a vertical position. - Page 17 For LCD Monitor/ Flat-Panel TV For Projector...
- Page 18 You may use the included Velcro® fabric hook-and-loop fastener to attach the Wireless USB VGA adapter to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host adapter. Change your display’s setting to select VGA as your input device. Please refer to the operating instructions supplied with your display.
-
Page 19: Wireless Usb Vga Display Settings
Wireless USB VGA Display Settings By default, the display monitor connected to the Wireless USB VGA adapter will be set to the best resolution and will extend your screen to the right. You may change the screen mode and the operation mode by double clicking on the Monitor icon in the Windows system tray. - Page 20 There are two options to adjust the Resolution, Color Quality, Screen Rotation, and Extended or Mirror Mode. One is to click on the IOGEAR DisplayLink Manager icon in the Windows tray as shown above, another is to go to Control Panel, double click on “Display”, then choose...
- Page 21 To set up the Wireless USB VGA Adapter to mirror the primary display: Go to the “Settings” tab of the Display Properties page Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” Ensure that “Extend my Windows desktop onto this monitor” is Unchecked Click “Apply”...
- Page 22 To set up extended mode: Go to the “Settings” tab of the Display Properties page Click on the Monitor connected to the “IOGEAR Wireless USB VGA adapter” Ensure that “Extend my Windows desktop onto this monitor” is checked Click “Apply”...
- Page 23 Screen Refresh Rate Configuration To adjust the refresh rate of the extended screen, click on “Advanced” and then the “Monitor” tab.
-
Page 24: Wireless Usb Vga Adapter In Wired Mode
Wireless USB VGA Adapter in Wired Mode Your Wireless USB VGA Adapter can also be used in wired mode. Make sure the position of the WIRED/ WIRELESS switch is in the WIRED position. Plug the USB cable between your computer and the Wireless USB VGA Adapter. -
Page 25: Frequently Asked Questions
Frequently Asked Questions For the latest FAQs, please go to IOGEAR website (www.iogear.com). My Wireless USB Host Adapter is plugged into my computer and my Wireless USB VGA Adapter is powered but I do not see anything on my display. What’s wrong? Check the host adapter manager utility provided by your Wireless USB Host Adapter (PC side) to see if there is an icon for your Wireless USB VGA Adapter. -
Page 26: Technical Specifications
Technical Specifications Specifications Function Operating System Support PHY Data Rate Operating Range Frequency Number of Channels RF Modulation Type Interface Video Resolution Video Streaming GUW2015V Microsoft XP 32-bit; Microsoft Vista 32/64-bit 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Up to 30 feet (10 meters) 3.1GHz to 4.8GHz (WiMedia Band Group 1) 7 channels (3 FFI + 4 TFI) QPSK/DCM... - Page 27 Screen Mode Color Depth USB Specification Association Mode Native Mode Antenna Type Reset Switch Power Consumption Max Output Power Power Adapter Extended and Mirror mode 32-bit True Color Certified Wireless USB 1.0; USB 2.0 Cable Association; Stores up to 16 Associated Hosts For playback of high resolution video Omni directional...
-
Page 28: Limited Warranty
The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions, or updates. For further inquiries please contact IOGEAR. -
Page 29: Federal Communications Commission
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations). -
Page 30: Contact
All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this... - Page 32 About Us About Us IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste.