Table of Contents
Advertisement
Frequently Asked Questions
1.
Problem:
WiCenter UWB Software reports errors when trying to use the Wireless USB Host
Adapter and Wireless USB Hub on Windows XP operating system.
Solution: Verify that Service Pack 2 (SP2) has been installed on your PC.
2.
Problem:
No LEDs lighting up on the Wireless USB Hub.
Solution: Check the power supply's connection to the Wireless USB Hub.
3.
Problem:
No LED on the Wireless USB Host Adapter.
Solution: Re-insert the Wireless USB Host Adapter into USB port.
4.
Problem:
LED does not light up after inserting a USB device into a peripheral port on the Wire-
less USB Hub.
Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply
from the Wireless USB Hub. Re-insert the Wireless USB Host Adapter and reconnect power to the
Wireless USB Hub.
22
Advertisement
Table of Contents
