Basic Controls; Main Unit - Panasonic TH-50LFC70U Operating Instructions Manual

Basic Controls

Main Unit

For 50 inch and 65 inch models
16
Remote control
sensor
Enter / Aspect button
Volume Adjustment
ENTER/
Volume Up "+" Down "–"
When the menu screen is displayed:
+
/
"+" : press to move the cursor up
VOL
"–" : press to move the cursor down
-
/
MENU Screen ON / OFF
MENU
Each time the MENU button is pressed, the menu screen will switch.
INPUT
INPUT button (INPUT signal selection)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to "On"
and Terminal Board is installed.)
Orange (Depending on the type of the
function board installed, when the power is
supplied to the slot)
Orange (When "Control I/F Select" is set to
"DIGITAL LINK/LAN" or "Wireless Network
Standby" is set to "On". Refer to "Operating
Instructions, Network Operations")
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input signal.)
• PC Power management (DPMS)
......................... Orange (With PC input signal.)
• DVI-D Power management
......................... Orange (With DVI input signal.)
Note:
If the power indicator is orange, power consumption during standby
is generally larger than that of when the power indicator is red.
Brightness Sensor
Detects the brightness in the viewing environment.
USB (VIEWER): Connect to USB memory.
SLOT: Terminal board (optional accessories) insert
slot (see page 5)
Note:
The right side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the right side slot.