Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Panasonic TH-42LFE7U
Summary of Contents for Panasonic TH-42LFE7U
- Page 1 Model No. TH-42LFE7U TH-42LFE7E TH-50LFE7U TH-50LFE7E TH-65LFE7U TH-65LFE7E TH-42LFE7ER Operating Instructions FULL HD LCD Display (for business use) Please read these instructions before operating your set English and retain them for future reference.
-
Page 2: Table Of Contents
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. -
Page 3: Important Safety Instructions
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a t r i a n g l e i s i n t e n d e d t o is in tend ed to tell the user... -
Page 4: Fcc Statement
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modi cations not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device. -
Page 5: Important Safety Notice
If the plug contains a removable fuse cover, you must ensure that it is re tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug. -
Page 6: Safety Precautions
• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in re or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer. - Page 7 If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately. • A short circuit may occur, which could cause re. Contact your local Panasonic dealer for any repairs that need to be made.
-
Page 8: Cleaning And Maintenance
Safety Precautions CAUTION When using the LCD Display Do not bring your hands, face or objects close to the ventilation holes of the Display. • Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. -
Page 9: Accessories
Control Transmitter instructions) N2QAYB000691 (R6 (UM3) Size × 2) Power supply cord TH-42LFE7U, TH-50LFE7U, TH-65LFE7U TH-42LFE7E/ER, TH-50LFE7E, TH-65LFE7E Attention Store small parts in an appropriate manner, and keep them away from young children. Remote Control Batteries Requires two R6 batteries. -
Page 10: Connections
Connections AC cord connection AC cord (accessory) Notes: • Insert the AC cord rmly into place. • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet rst. • The included AC cord is for use with this unit only. Video equipment connection IR IN/OUT IR IN/OUT (infrared signal) Terminal... -
Page 11: Audio Out Connection
Connections AUDIO OUT connection Notes: • Additional equipment and cables shown are not supplied with this set. • To output sound from the AUDIO OUT terminal of the Display, be sure to set “Output Select” to “AUDIO OUT” in the “Sound Adjustment”... -
Page 12: Dvi-D In Connection
Connections DVI-D IN connection PC with DVI-D video out Stereo mini plug (M3) Shared with PC DVI-video cable (Within 5 m) DVI-D Input Connector Pin No. Signal Name Pin No. Signal Name Pin Layouts T.M.D.S. data 2- T.M.D.S. data 2+ +5 V DC T.M.D.S. -
Page 13: Pc Input Terminals Connection
Connections PC Input Terminals connection (Female) Conversion adapter COMPUTER (if necessary) Mini D-sub 15p (Male) Shared with DVI-D IN. Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. -
Page 14: Serial Terminals Connection
Connections SERIAL Terminals connection The SERIAL terminal is used when the Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Setup” menu to “RS-232C”. (see page 41) COMPUTER RS-232C Straight cable... -
Page 15: Ir In/Out (Infrared Signal) Connection
Connections IR IN/OUT (infrared signal) connection Connect between the IR OUT terminal of the rst display and the IR IN terminal of the second display with a 3.5 mm stereo mini plug. Infrared signals will be sent from the rst display to the second display. First display Second display Third display... -
Page 16: Power On / Off
Power On / Off Connecting the AC cord plug to the Display. Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type Power switch tted to your set. - Page 17 Power On / Off When rst switching on the unit Following screen will be displayed when the unit is turned on for the rst time. Select the items with the remote control. Unit buttons are invalid. OSD Language English (UK) OSD Language Deutsch Français...
-
Page 18: Selecting The Input Signal
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: HDMI1 HDMI2 HDMI1: HDMI input terminal in AV IN (HDMI1). HDMI2: HDMI input terminal in AV IN (HDMI2). -
Page 19: Basic Controls
Basic Controls Main Unit Power Indicator The Power Indicator will light. • Power-OFF ..Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ..Red Orange (When the control terminal selection is “LAN”. -
Page 20: Remote Control Transmitter
Basic Controls Remote Control Transmitter OFF TIMER button The Display can be preset to switch to stand-by after a xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes (off Press to make selections. timer cancelled) each time the button is pressed. -
Page 21: Aspect Controls
ASPECT Controls The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. -
Page 22: Digital Zoom
Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. Press to access Digital Zoom. EXIT The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] POSITION / ACTION button... -
Page 23: On-Screen Menu Displays
On-Screen Menu Displays Remote Control Unit Display the menu screen. Press to select. (Example: Picture menu) Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos./Size Setup Select the item. Select. -
Page 24: Adjusting Pos./Size
Adjusting Pos./Size Press to display the Pos./Size menu. Pos./Size Press to select the menu to adjust. Normalise Normal Auto Setup H-Pos H-Size V-Pos V-Size Press to adjust the menu. Clock Phase Dot Clock 1:1 Pixel Mode Note: Unadjustable items are grayed out. Adjustable items differ depending on the input signal Press to exit from adjust mode. - Page 25 Adjusting Pos./Size H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position. H-Size Adjust the horizontal size. V-Size Adjust the vertical size. Clock (During PC input signal) Phase Eliminate the ickering and distortion. Dot Clock (During PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized.
-
Page 26: Picture Adjustments
Picture Adjustments Press to display the Picture menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. -
Page 27: Advanced Settings
Picture Adjustments Notes: Item Effect Adjustments • You can change the level of each function Adjusts luminance of the back (Backlight, Contrast, Brightness, Sharpness) Backlight light. Darker Brighter for each Picture Mode. • The setting details for normal, dynamic Selects the proper brightness and cinema respectively are memorized Contrast* and density for the room. -
Page 28: Sound Adjustment
Sound Adjustment Sound Press to display the SOUND menu. Normalise Normal SPEAKERS Output Select Select to adjust each item. Normal Sound Mode Press to select the menu to adjust. Bass Treble Select the desired level by listening to the sound. Balance Surround Press to exit from adjust mode. -
Page 29: Present Time Setup / Set Up Timer
PRESENT TIME Setup / Set up TIMER The timer can switch the Display On or Off. Setup Before attempting Timer Set, con rm the PRESENT TIME and adjust if necessary. MULTI DISPLAY Setup Then set POWER ON Time / POWER OFF Time. Set up TIMER PRESENT TIME Setup Network Setup... -
Page 30: Set Up Timer
PRESENT TIME Setup / Setup TIMER Set up TIMER Set the program for turning the power On/Off and select the input signal at the speci ed time. Up to 20 programs can be set. [Setting Example] Program 1, Every Monday, 12:00, Power On, Input: HDMI Set up TIMER PRESENT TIME MON 0 : 03 Set the program number. -
Page 31: Screensaver (For Preventing Image Retention)
Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each. Black Dark Gray Gray Light Gray White Setup Press to display the Setup menu. - Page 32 Screensaver (For preventing image retention) Setup of Screensaver Time After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.) Press to select Start Time / Finish Time Screensaver (When Time Designation is selected).
- Page 33 No activity power off Press to select the menu to adjust. Setup Signal Screensaver Input label ECO Mode settings Wobbling YUV/RGB-in select No activity power off Press to select “Enable” or “Disable”. Disable English ( UK ) OSD Language Press to exit from Setup. When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the Display for 4 hours.
-
Page 34: Eco Mode Settings
ECO Mode settings ECO Mode settings ECO Mode Custom select Press , select “ECO Mode settings” in No signal power off adjust Enable “Setup” menu and press button. HDMI1 Power management HDMI2 Power management PC Power management DVI-D Power management Power save ECO Mode Custom: The menu of power consumption reduction is individually set. -
Page 35: Customizing The Input Labels
Customizing the Input labels This function can change the label of the Input signal to be displayed. (see page 16) Setup Press to display the Setup menu. Signal Screensaver Input label Press to select Input label. ECO Mode settings Wobbling YUV/RGB-in select Press to display the Input label screen. -
Page 36: Selecting The On-Screen Menu Language
Selecting the On-Screen Menu Language Press to display the Setup menu. Press to select the OSD Language. Press to select your preferred language. Selectable languages Setup English (UK) Signal Screensaver Deutsch Input label ECO Mode settings Français Wobbling YUV/RGB-in select Italiano No activity power off Disable... -
Page 37: Setup For Multi Display
Setup for MULTI DISPLAY By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display number to determine its location. (Example) group of 4 (2 ×... -
Page 38: Id Remote Control Function
Setup for MULTI DISPLAY Item Details Select the required arrangement number. (A1-E5 : Refer to the following) Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 2 ) ( 4 × 4 ) ( 5 ×... -
Page 39: Setup For Input Signals
Setup for Input Signals YUV / RGB-IN select Select to match the signals from the source connected to DVI-D IN terminal. YUV signals “YUV” RGB signals “RGB” Setup Press to display the Setup menu. Signal Screensaver Input label Press to select the “YUV/RGB-in select”. ECO Mode settings Wobbling Press to select the desired mode. -
Page 40: Signal Menu
Setup for Input Signals Signal menu Note: “Signal” setup menu displays a different setting condition for each input signal. Setup Signal Screensaver Press to display the Setup menu. Input label ECO Mode settings Wobbling Press to select the “Signal”. YUV/RGB-in select No activity power off Disable OSD Language... -
Page 41: Xga Mode
Setup for Input Signals XGA Mode This menu is displayed when the input signal is analog. This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz). When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz XGA input signal irrespective of this setting. -
Page 42: Hdmi Range
Setup for Input Signals HDMI Range Switches the dynamic range according to the input signal from HDMI terminal. Press to select “HDMI Range”. [ Digital ] Signal Press to select “Video(16-235)”, “Full(0-255)”, “Auto”. Cinema reality HDMI Range Auto Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer Auto: Switches the dynamic range automatically between “Video(16-235)”... -
Page 43: Network Setup
Network Setup Con gure the various settings required to use the network function. Network Setup Setup Network Setup MULTI DISPLAY Setup Control I/F Select Press AMX D.D. Set up TIMER RS-232C Crestron Connected™ PRESENT TIME Setup Display name Network Setup LFE7-00 LAN Setup Menu Display Duration... - Page 44 Network Setup LAN Setup Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter can be con gured. DHCP, IP address, Subnet mask, and Gateway settings Select “LAN Setup” and press Set DHCP.
-
Page 45: Options Adjustments
Options Adjustments Options Press to display the SET UP menu. Input Search On screen display Press to select “OSD Language”. Initial input Initial VOL level Maximum VOL level Input lock Button lock Press for more than 3 seconds. Remocon User level 5V Charge Press to select “Options”. - Page 46 LAN Control Protocol 1: Control with the Panasonic Display sequence. Protocol Protocol 2: Control with the sequence that compatible with Panasonic Projector. RS-232C/LAN Set up the informing manner if error warning occurred. (see page 46) Information Timing 3..You can set the power-on delay time of the displays to reduce the power load, when you press turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.
-
Page 47: Input Search
On: Power switch operation is disabled. Power Switch Lock Off: Power switch operation is enabled. Note: This function is only for TH-42LFE7U, TH-50LFE7U, TH-65LFE7U. Normalisation When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”... -
Page 48: Rs-232C/Lan Information Timing
Options Adjustments RS-232C/LAN Information Timing Set up the informing manner for no signal or temperature rising. While RS-232C controls: Warning or error message sent on the display automatically. While LAN controls: Acquire the warning or error message from the display. select Options RS-232C/LAN Information Timing... -
Page 49: Using Network Function
Using Network Function Network Connection This unit has a network function to control the network connected display with your computer. Note: To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 41) When “LAN”... -
Page 50: Command Control
Commands used in the serial control are supported. (see page 12) Note: Consult your local Panasonic dealer for detail instructions on command usage. PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™... -
Page 51: Using Web Browser Control
The password can be changed on the Password Setup screen after logging in (see page 51). The user name cannot be changed. Under no circumstances, Panasonic Corporation or it's associated companies will ask customers their password directly. Even if you are asked directly, please do not reveal your password. -
Page 52: Display Control (Basic Control/Option Control Screen)
Using Web Browser Control TOP screen structure of the Web browser control After logging in, the TOP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC... -
Page 53: Network Setting (Network Setting Screen)
Enter the old password. PASSWORD Enter the new password. PASSWORD Notes: Enter the password entered in “NEW • The default password is “panasonic”. PASSWORD PASSWORD” for con rmation. • Up to 32 alphanumeric characters can be used for a (RETYPE) password. -
Page 54: Crestron Connected™ Page
Using Web Browser Control Crestron Connected™ page You can monitor or control the Display using Crestron Connected™. When you click [Crestron Connected™], the Crestron Connected™ operation page is displayed. If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does not appear. - Page 55 Using Web Browser Control Info page Click Info on the operation page. 1 Display name Displays the name of the Display. 2 Mac Address Displays the MAC address. LFE7-00 3 Resolution Displays the resolution of the Display. 4 Power Status Displays the status of the power.
-
Page 56: Troubleshooting
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Electrical Appliances Interference Noisy Sound Cars / Motorcycles Fluorescent light Volume Normal Picture No Sound (Check whether the mute function has been activated on the remote control.) Not plugged into AC outlet Not switched on No Picture... -
Page 57: Applicable Input Signals
Applicable input signals PC signals Mark: Applicable input signal Horizontal frequency Vertical frequency PC IN DVI-D IN Signal name HDMI (kHz) (Hz) (Dot clock (MHz)) (Dot clock (MHz)) 640x400@70Hz 31.46 70.07 * (25.17) 640x480@60Hz 31.47 59.94 * (25.18) * (25.18) 640x480@72Hz 37.86 72.81... -
Page 58: Shipping Condition
Wait for 10 seconds. Press the power switch ( ) on main unit to turn the power off. * For TH-42LFE7U, TH-50LFE7U, TH-65LFE7U If the power switch is locked, please disconnect the AC cord plug from the wall outlet. [from the unit] 1 Press the MENU button till the Setup menu is displayed. -
Page 59: Speci Cations
Speci cations TH-42LFE7U TH-42LFE7E/ER 110 - 127 V AC, 50/60 Hz 220-240 V AC, 50/60 Hz Power Source Power Consumption Rated Power 95 W Consumption 0.5 W Stand-by condition 0.4 W Power off condition Sound 25 mm × 90 mm × 2 pcs... - Page 60 Speci cations TH-50LFE7U TH-50LFE7E 110 - 127 V AC, 50/60 Hz 220-240 V AC, 50/60 Hz Power Source Power Consumption Rated Power 95 W Consumption 0.5 W Stand-by condition 0.4 W Power off condition Sound 25 mm × 90 mm × 2 pcs Speakers 20 W [10 W+10 W] (10 % THD) Audio Output...
- Page 61 Speci cations TH-65LFE7U TH-65LFE7E 110 - 127 V AC, 50/60 Hz 220-240 V AC, 50/60 Hz Power Source Power Consumption Rated Power 135 W Consumption 0.5 W Stand-by condition 0.4 W Power off condition Sound 22 mm × 90 mm × 2 pcs Speakers 20 W [10 W+10 W] (10 % THD) Audio Output...
- Page 62 <Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.) Copyright ©...
- Page 63 Warranty Service purposes. Model Number Serial Number For TH-42LFE7U, TH-50LFE7U, TH-65LFE7U Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America Executive Of ce : Two Riverfront Plaza, Newark, New Jersey 07102-5490 Panasonic Canada Inc.