Attach The Rail To The Header Bracket - Craftsman 139.18458DM Owner's Manual

Header Wall
Header Bracket
Idler Pulley
Garage
Door
HARDWARE SHOWN ACTUAL SIZE
Clevis Pin 5/16"x1-1/2"
INSTALLATION STEP 3

Attach the Rail to the Header Bracket

• Position the opener on the garage floor below the header
bracket. Use packing material as a protective base.
NOTE: If the door spring is in the way you'll need help. Have
someone hold the opener securely on a temporary support to
allow the rail to clear the spring.
• Position the rail bracket against the header bracket.
• Align the bracket holes and join with a clevis pin 5/16"x1-1/2"
as shown.
• Insert a ring fastener to secure.
Header
Bracket
Mounting
Hole
Ring Fastener
14
Opener Carton or
Temporary
Support