ZyXEL Communications SBG Series Support Notes page 8

2. Select the
3. Select direction from ―WAN‖ to ―LAN‖.
4. Select Source Device
5. Keep Source IP address
6. Select Destination Device
7. Select IP Type
8. Select Service
9. Keep Protocol
10. Select Policy
11. Click on ―Apply‖.
4. Go to Security>
―Apply‖.
Order ―2‖.
―Specific IP Address‖.
empty (It means Any).
―PC-1(192.168.1.50)‖.
―IPv4‖.
―Specific Service‖.
empty (means Any).
―Drop‖.
Firewall > General
ZyXEL – SBG Support Notes
> Click Firewall ―Enable‖ > Click on
Back to Table of Contents
8