Advertisement
Quick Links
System Firmware Update Instructions for AppRadio
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
In order to perform this update, the following items are needed:
Pioneer AppRadio 4 (SPH-DA120)
A USB storage device with the following requirements:
-
2 GB or larger in capacity, formatted to FAT32
-
Should be blank (should not contain any files)
CAUTION
The only USB port that supports the firmware update is USB port 1.
DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware.
Procedure:
1.
Press the HOME button to display the Top menu screen.
2.
Touch the following keys in the following order.
The "System" screen appears
®
4 (SPH-DA120)
Advertisement
Related Manuals for Pioneer AppRadio 4
Summary of Contents for Pioneer AppRadio 4
- Page 1 It is important that you complete all steps correctly and in the order described below. In order to perform this update, the following items are needed: Pioneer AppRadio 4 (SPH-DA120) A USB storage device with the following requirements:...
- Page 2 Scroll down the list. Touch [System Information]. Touch [Firmware Information]. After the “Firmware Information” screen appears, check the firmware version number. Verify that the firmware on your unit is not already 1.07.
- Page 3 Updating the firmware on your unit IMPORTANT DO NOT perform any further steps of this firmware update if the model number is anything other than AppRadio 4 (SPH-DA120). Disconnect any mobile devices that are currently connected to your unit. ...
- Page 4 9. Touch [System Information]. 10. Touch [Firmware Update]. The “Firmware Update” screen appears. 11. Touch [Continue] to display the data transfer mode.
- Page 5 Wait for the file check to finish. 12. Touch [Start]. Note: Images are for illustration purposes only. Actual version number may differ. (Please note: After pressing Start the receiver will restart itself Progress status is shown. and return to the update screen below.) 13.
- Page 6 14. Press the HOME button. 15. Remove the USB storage device. 16. The firmware update is complete. Confirm that the firmware has been updated Procedure: Press the HOME button to display the Top menu screen. Touch the following keys in the following order. The “System”...
- Page 7 Touch [Firmware Information]. After the “Firmware Information” screen appears, verify that the firmware version is 1.07. ©2014 Pioneer Electronics (USA)