H Ardware I Nstallation; Download And Install The Latest Version Of Controlspace Designer Software; Unpacking; Expansion Card Installation - Bose ControlSpace ESP-880 Installation Manual

pro.Bose.com
H I
ardware nstallatIon
Use the following procedure when setting up a ControlSpace
1. Download and install the latest version of ControlSpace
2. Unpack the ESP processor
3. Install expansion card
4. Rack-mount the ESP processor
5. Make analog audio I/O connections
6. Make CC-16, RS-232, and ESPLink connections
7. Connect GPIO devices
8. Establish a network connection
9. Connect the power cable
10. Configure the ESP processor using ControlSpace Designer software

1. Download and install the latest version of ControlSpace Designer software

Install ControlSpace Designer software prior to working with the ControlSpace ESP processor. Visit pro.Bose.com to download the
latest software version which includes product firmware, the latest algorithms, and a detailed help system that guides system designers
and installers through configuring the ESP processor for use in high-quality audio systems.

2. Unpacking

The product carton includes the following items. Inspect all components for shipping damage and contact your Bose Representative if
any issues are found.
Figure 5. Carton Contents
Bose ControlSpace
® ®
fixed-I/O ESP
Cable ties (11) Control I/O connectors (2)

3. Expansion Card Installation

Expansion cards insert into the rear-panel digital expansion slot of the ESP processor. Refer to the documentation included with each
card for specific installation instructions.

4. Rack-Mounting

Fixed-I/O ESP processors are designed to fit standard 19-inch (48 cm) rack equipment, occupying 1 rack-unit (RU) in height, and
requiring a mounting depth of 8.2 inches (208 mm) from the front rack rail. Use four fasteners with washers (not supplied) to mount
the processor.
The product uses active side ventilation and can safely operate in ambient conditions from 32°F - 104°F (0°C - 40°C).
Refer to "Technical Specifications" on page 21 for power dissipation ratings.
English
fixed-I/O engineered sound processor for the first time.
®
Designer software
® ™
Installation Guide
Phoenix Contact
®
dual-channel audio
connectors (8)
Installation Guide
Power cord
CC-16 connector
15