ZyXEL Communications P-662HW-D Series Support Notes page 90

Step 3: You can modify the rule by clicking the button 'Edit' on the rule:
Key Settings:
RuleName
Give this rule a name, for example, 'WWW'
BW Budget
Configure the bandwidth you would like to allocate to this rule
Enter a number between 0 and 7 to set the priority of this class. The
Priority
higher the number, the higher the priority. The default setting is 3.
Check this box if you would like to let this class to borrow bandwidth from
Use All
it's parents when the required bandwidth is higher than the configured
Managed
amount. Do not check this if you want to limit the bandwidth of this class
Bandwidth
at the configured value.(Please note that you should also disable
Maximize Bandwidth Usage on the interface to meet the condition.)
Service
Select User-defined, SIP, FTP, or H.323 to specify the traffic types
Destination
Enter the IP address of destination that meets this class.
IP Address
All contents copyright © 2006 ZyXEL Communications Corporation.
P-662HW-D Series Support Notes
89