Table of Contents
Advertisement
y Current temperature value
6.BUTTONS
p"Up button (for EMS,HAL,LAL)
q"MODE button
(for cycling through the mode loop)
r Down button (for EMS,HAL,LAL)
s Laser/Backlight ON/OFF button
(pull trigger and press button to activate
laser/backlight)
MODE Button Function
The infrared thermometer measures
Maximum (MAX), Minimum (MIN),
Differential (DIF), and Average (AVG)
Temp. Each time you take a reading.
This data is stored and can be
recalled with the MODE button until a
new measurement is taken.
When the trigger is pulled again, the
unit will begin measuring in the last
mode selected.
Pressing the MODE button also
allows you to access the High
Alarm(HAL),Low Alarm(LAL),
Emissivity(EMS).Each time you press
MODE ,you advance through the
The diagram shows
mode cycle.
the sequence of functions in
the MODE cycle.
8
Advertisement
Table of Contents
