Baby Lock Tiara III BLTR16-3 Instruction And Reference Manual page 31

When recording the capacity of a bobbin, the Tiara III
assumes you will stitch at 10 stitches per inch if TruStitch
stitch regulation (optional accessory) is not attached
to your machine. Therefore, if you estimate bobbin
capacity and stitch using different stitches-per-inch,
increase the capacity setting (if stitching fewer than 10
stitches per inch) or decrease it (if stitching more than
10 stitches per inch).
If TruStitch is attached and powered on, the low-bobbin
capacity calculation uses the current last TruStitch
stitches-per-inch setting to calculate bobbin capacity
when you are stitching in regulated mode. In Manual
mode the last stitches-per-inch setting used in regulated
mode is used to calculate the bobbin usage.
You can store three Bobbin Thread Capacity preset values – one for each of three different types of thread. Simply
go through the record process with a full bobbin of that type of thread and then store the capacity as a preset.
When you switch to using that type of thread, press appropriate preset button. Insert a full bobbin with that type
of thread, press New Bobbin, and all of the settings will be based on that type of thread.
Timers
The Tiara III has two useful timers. One timer enables
you to set a reminder alarm (like a kitchen timer) and
the other timer tracks how much time you spend on a
quilt.
The first (top) timer is a reminder timer. It enables you
to set an alarm to go off after a specific period of time,
similar to a kitchen timer. Use the plus (+) and minus (–)
buttons to set the time duration. Then press the "play"
button to activate the timer. When the time duration
has elapsed, an alarm will sound and a message appears
on the display.
The second (bottom) timer enables you to track how
much time you spend on a quilt project. When you begin
a new project, press the Reset button. Then press the
Play button to begin recording your quilting time. The
timer records when the machine is quilting. The time is
saved even when the machine is turned off. When you
begin another quilting session, quilting time is added to
the timer. Only press Reset when you want to zero-out
the timer and begin a new timing session (Figure 36).
Page 30
Figure 35
Solid beep for 1/3 of a stitch cycle,
no beep for the rest of the cycle.
Timers
Back
Figure 36
0
0 Reset
Main
Baby Lock Tiara III Instruction Manual