On page 153, the "1–2C: Save Combi/Prog" operation now allows you
to save speciﬁed individual banks of Programs and Combinations.
Change the explanation and procedure to read as follows:
All combinations, programs, and drum kits from internal memory, in addition
to the global parameters, will be saved to disk as a .PCG ﬁle (diagram 'a' on
page 149). You can specify the program and combination banks that will be
This command is valid only if the current directory is a DOS directory.
When this command is selected, the
dialog box at right will appear.
Press the text edit button to access the
text entry dialog box, and specify the
Basic Guide, page 6).
Check the check boxes for the data
items that you wish to save.
Combinations consist of programs,
and some programs use a drum kit as
their sound source.
As necessary, when saving combinations you should also save the programs
used by those combinations, and when saving programs you should also
save the drum kits used by those programs.
To save the data press the OK button. To cancel saving, press the Cancel but-
Add the following messages to "Messages" on pages 160, 162 and 163.
Audio tracks were skipped
Situation: On a TRINITY series instrument which does not have the HDR-TRI
option, you attempted to load a ﬁle that included an audio track, and
the data was loaded without the audio track.
No items were selected
Situation: In the Save All or Save Combi/Prog dialog box, no check boxes were
There is no readable data
Situation: On a TRINITY series instrument which does not have the PBS-TRI
option, you attempted to load a ﬁle which contained only banks C