Picture In Picture; Configuration 1; Pip Size; Auto Setup - Mitsubishi Electric LDT321V User Manual

Main-Menu
PIP(PICTURE IN PICTURE)
Note: The "PIP" and "POP" modes do not function when the screen size is "CUSTOM" or "REAL".
Sub-Menu

PIP SIZE

PIP AUDIO
PIP RESET
Main-Menu

CONFIGURATION 1

Sub-Menu

AUTO SETUP

*:INPUT RGB2/3 only

AUTO ADJUST

*:INPUT RGB2/3 only

POWER SAVE

LANGUAGE
Selecting the size of picture inserted at the
"Picture-in-Picture" (PIP) mode.
"Large", "Middle" and "Small" are available.
Selecting the sound source in PIP mode.
When selecting "MAIN AUDIO", you will get the
sound for the main picture and when selecting
"PIP AUDIO", you will get the sound for the
picture instead.
Selecting PIP Reset allows you to reset all
OSD settings from PIP setting.
Select "Yes" and press "SET" button to restore
the factory preset data.
Press "EXIT" button to cancel and then return
to the previous menu.
Press "SET" button to automatically adjust
screen size, horizontal position, vertical
position, clock, clock phase, white level and
black level.
Press "EXIT" button to cancel execution AUTO
SETUP and then will return to the previous
menu.
Selecting the auto adjust ON/OFF.
Selecting ON when changing the timing, the
horizontal position, vertical position and clock-
phase will adjust automatically.
Selecting RGB "ON", the monitor will go to
power management mode when RGB1,2,3
sync is lost. Selecting VIDEO "ON", the
monitor will go to power management mode
after about 10 minutes delay from when
DVD/HD and VIDEO input signal is lost.
OSD control menus are available in seven
languages. (English, German, French,
Spanish, Italian, Swedish and Japanese)
English-24