Screen; Picture Reset; Clock Phase - Mitsubishi Electric LDT321V User Manual

TINT
*:INPUT DVD/HD, VIDEO<S>,
VIDEO only
COLOR
*:INPUT DVD/HD, VIDEO<S>,
VIDEO only
COLOR TEMPERATURE
COLOR CONTROL
*:INPUT RGB1,2,3 only

PICTURE RESET

Main-Menu

SCREEN

Sub-Menu
H POSITION
V POSITION
CLOCK
*:INPUT RGB2/3 only

CLOCK PHASE

*:INPUT RGB2/3 only
Adjust the tint of the screen.
Press + button the flesh tone color becomes
greenish.
Press - button the flesh tone color becomes
purplish.
Adjust the color of the screen.
Press + button to increase color depth.
Press - button to decrease color depth.
Color temperature can be selected out of
5000K, 6500K and 9300K.
When USER is selected, R.G.B can be
adjusted individually.(RGB 1,2,3 only)
R, G, B: Increases or decreases Red,Green,
and Blue depending upon which is selected.
The change in color will appear on screen and
the direction (increase or decrease) will be
shown by the color bars.
NOTE:
is selected by COLOR TEMPERATURE.
Selecting Picture reset allows you to reset all
OSD settings about PICTURE setting.
Select "Yes" and press "SET" button to restore
to factory preset data.
Press "EXIT" button to cancel and then return
to the previous menu.
Controls Horizontal Image position within the
display area of the LCD.
Press + button to move screen to right.
Press - button to move screen to left.
Controls Vertical Image position within the
display area of the LCD.
Press + button to move screen to UP.
Press - button to move screen to DOWN.
Press + button to expand the width of the
image on the screen the right.
Press - button to narrow the width of the image
on the screen the left.
Improves focus, clarity and image stability by
increasing or decreasing this setting.
English-22
It can be adjusted only when USER