Battery - Honda EM6500SX Owner's Manual

Hide thumbs Also See for EM6500SX:
Table of Contents

Advertisement

INITIAL USE INSTRUCTIONS
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered
under warranty.
Move the generator at least 10 feet (3 meters) away from the fueling
source and site before starting the engine.

BATTERY

WARNING: Battery posts, terminals, and related accessories contain
lead and lead components. Wash hands after handling.
The battery is disconnected for shipment.
1. Remove the cover (see page 58)
2. Connect the battery positive (+) cable to the battery positive (+)
terminal first, and tighten the bolt securely.
3. Slide the battery boot over the positive (+) cable and terminal.
4. Connect the battery negative (–) cable to the battery negative (–)
terminal, and tighten the bolt securely.
5. Install the battery holder band.
6. Install the battery cover in the reverse order of removal (see page
58).
Never operate the generator without the battery cover in place, as
poor engine and generator performance will result.
BATTERY BOOT
POSITIVE (+)
CABLE
88
BATTERY HOLDER BAND
NEGATIVE (–) CABLE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Em5000sxEm4000sx

Table of Contents