Fuel Valve Lever; Voltage Selector Switch - Honda EM6500SX Owner's Manual

Fuel Valve Lever

The fuel valve lever is located
between the fuel tank and
carburetor.
The fuel valve must be in the ON
position for the engine to run.
After stopping the engine, turn
the fuel valve to the OFF position.

Voltage Selector Switch

The voltage selector switch switches generator output to produce
''120V ONLY'' or ''120V/240V.'' If a 240V appliance is connected to the
4-prong receptacle, the switch must be in the ''120V/240V'' position. If
only a 120V appliance is being connected to any of the 120V 3-prong
receptacles, select the ''120V ONLY'' position.
Select the voltage before starting the engine.
Switch Position
120V/240V: The 120V and 120V/240V receptacles can be used
simultaneously.
120V ONLY: ONLY 120 volts is available in this position; 240 volts is
not available. The most power will be available at the 30A 120V
locking plug receptacle.
VOLTAGE SELECTOR SWITCH
CONTROLS & FEATURES
ON
FUEL VALVE LEVER
OFF
120 V/240 V
120 V ONLY
13