• Using the recoil starter:
a. Turn the engine switch to the
ON position.
b. Pull the starter grip lightly
until you feel resistance; then
pull briskly in the direction of
the arrow as shown.
Do not allow the starter
•
grip to snap back against
the engine. Return it gently
to prevent damage to the
starter.
Do not let the starter rope
•
rub against the generator
body, or the rope will wear
out prematurely.
Be careful not to hit your
•
hand against the handle
when pulling the starter
grip.
6. If you wish to use the Auto
Throttle system, turn the Auto
Throttle switch to the ON
position after the engine has
warmed up for 2 or 3 minutes.
ON
Direction to pull
AUTO THROTTLE SWITCH
OPERATION
ENGINE SWITCH
STARTER
GRIP
ON
27