Fill Fuel Tank
Fill fuel tank. DO NOT OVERFILL! See Filling
Fuel Tank on page 18.
Check Function of all Controls
Ensure unit runs and performs properly. Refer
to OPERATION on page 15.
Run-in Attachment Belt
1. Start unit in a well-ventilated area
according to Starting and Shut Off on
page 19.
2. Engage attachment clutch lever and run
attachment for about 15 minutes.
3. Stop unit, wait for all moving parts to
stop, and remove spark plug wire.
4. Adjust clutch idler according to
Attachment Clutch/Brake Adjustment on
page 26.
5. Adjust belt finger, if necessary. See
Check Belt Finger Clearance on
page 28.
EN - 13