Gardena EasyCut 400/25 Operating Instructions Manual page 6

Setting the trimmer to
body height:
2
1
w
i
Adjusting the plant guard:
Starting the trimmer:
16
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
The clamping sleeve
prevent the shaft from being moved.
Setting the additional handle:
v Pull the lock
additional handle
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
Working position
v Turn plant guard
until it locks into place.
Switching the trimmer on:
1. Press the start button
Switching the trimmer off:
v Release the start button
o
, extend the handle
i
must be fastened firmly enough to
i
belonging to the additional handle
1
to the desired incline and release the lock
2
and additional handle
w
8
8
Parking position
through 90° into the required position
8
on the handle.
o
on the handle.
o
to the
w
.
i
, set the
2
.
1
in
2