Table of Contents
Advertisement
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
Six groups of settings can be programmed using the MID*: Adaptive Cruise Control
(ACC) Setup (if equipped), Meter Setup, Position Setup, Lighting Setup,
Door/Window Setup, and Wiper Setup.
M o d i f y i n g t h e A u t o D o o r U n l o c k S e t t i n g
As the default setting, only the driver's door unlocks when you shift to Park.
Follow the steps below to set all doors to unlock when you shift to Park:
1. Select "CHG SETTING."
2. Select "DOOR/WINDOW
SETUP."
3. Select "AUTO DOOR
UNLOCK."
*
See Customized Settings in your Owner's Manual for other programmable settings.
8
Press the Info button to toggle to
the "Keyless Memory Settings"
display, then press SEL/RESET to
activate the menu.
SEL/RESET
button
Info
button
4. Select "SHIFT TO P."
5. Select "ALL DOORS."
6. Once the setting has been
saved, select "EXIT."
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
Store driver's seat, steering wheel, and side mirror positions into memory for each
corresponding keyless remote (1 or 2), which are recalled when you unlock the
driver's door with the remote and enter the vehicle.
H o w I t W o r k s
1. Turn the ignition switch to
ON (II). Shift into Park (P).
2. Adjust your preferred seat,
steering wheel, and outside
mirror settings.
Note: Stored positions can also be recalled by pressing memory buttons (1 or
2) on the door.
3. Press MEMO. You will hear a
beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
9
Advertisement
Table of Contents
