Driving Position Memory System (Dpms); Reverse Tilt Door Mirrors; Multi-View Rear Camera - Acura RDX 2014 Advanced Technology Manual

D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
Store up to two driver's seat and mirror positions into memory for each corresponding
remote transmitter (1 or 2).
P r o g r a m m i n g t h e D P M S
1. Turn the vehicle on. Shift into
Park (P).
2. Adjust the seat and outside
mirrors to your preferred positions.
Notes:
• Once set, stored positions can be recalled by pressing one of the memory
buttons (1 or 2) on the door.
• Lumbar position cannot be stored.
R E V E R S E T I L T D O O R M I R R O R S
When you shift into Reverse (R), either door mirror can be tilted downward to improve
your view as you parallel park. Shifting out of Reverse returns the tilted mirror to its
original position.
H o w I t W o r k s
• To tilt the driver's door
mirror, push the mirror
selector switch to the left
(L) position when in
Reverse.
• To tilt the passenger's
door mirror, push the
mirror selector switch to
the right (R) position
when in Reverse.
• To turn the feature off,
push the switch to the
middle position.
10
3. Press SET. You will hear a beep.
4. Within 5 seconds, press the
memory button corresponding
to the remote (1 or 2) you are
using. You will hear two beeps.
M U L T I - V I E W R E A R C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
H o w I t W o r k s
• When you shift into Reverse (R), a real-time
image of the area behind your vehicle is shown
in the navigation display.
• Yellow parking guidelines also appear to help
you judge distance.
• The rearview display turns off when you shift out
of Reverse.
A d j u s t i n g t h e V i e w
T u r n i n g t h e G u i d e l i n e s
O n o r O f f
Press and hold CANCEL for
about 3 seconds. If the
guidelines are turned off, they
remain off until turned on again.
S w i t c h i n g V i e w s
There are three rearview modes:
wide, normal, and top down.
• Press ENTER to toggle between
views.
• Rotate the Interface Dial to
adjust the screen brightness.
Wide
Wide
Normal Top down
Normal Top down
11
9