Advertisement
T R O U B L E S H O O T I N G
Before Calling for Service
Before calling for service, check the trouble
shooting table on this page. This table lists possible
problems that you can remedy without difficulty to
avoid an unnecessary service call.
If you do need service, contact your dealer or the
manufacturer. In any correspondence, refer to the
model number and serial number of your unit which
is located on the lower front cabinet flange. Retain
you proof of purchase. You may want to record
these numbers in the space provided on this page.
Follow the procedure outlined on page 5.
8
Problem
Odor in cabinet
Noisy operation
Cabinet vibrates
Cabinet light not working
Appliance will not run
Appliance runs too long
Moisture collects inside
Moisture collects on outside
surface
Interior too hot/too cold
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.
Possible
Causes/Solutions
• Interior needs cleaning
• Cabinet not level
• Weak floor
• Cabinet not level
• Weak floor
• Tube burned out
• No power at outlet
• Temperature control turned
to "OFF"
• Line cord not plugged in
• No power at electrical
outlet
• House fuse blown
• Prolonged door openings
• Control set too cold
• Condenser needs cleaning
• Too many door openings
• Prolonged door openings
• Hot, humid weather
increases condensation
• Hot, humid weather
increases condensation.
As humidity decreases,
moisture will disappear.
• Control improperly set.
• Control improperly set
• Faulty thermometer
• Relocate thermometer to
center of cabinet and
recheck
Advertisement
