Table of Contents
Advertisement
F
P
RONT
ANEL
POWER ( O/I ) Switch
This is the main power switch for the repeater.
Power Indicator ( MAIN )
This LED glows green when the main power source
is used.
Power Indicator ( BACKUP )
This LED glows red when the backup power source
is used.
MIC Jack
Connect the microphone plug to this jack. This jack
is also used for writing and reading channel fre-
quency or other configurations via the USB Port of
the PC on which the clone editor (CE60) is running.
Programmable Function ( PF ) Key
Six pushbuttons on the front panel are program-
mable function (PF) keys, each with an orange in-
dicator inside. Each key can be programmed with
two functions, one for a "long" press and one for a
"momentary" press. The PF key functions may be
customized, via programming by your VERTEX
STANDARD dealer, to meet your communications
network requirements. Note that some functions
may require the purchase of optional internal ac-
cessories.
VOL Knob
This control knob adjusts the output level of the front
speaker and external speaker jack on the back panel.
Page 2
C
& C
ONTROLS
VXR-9000V-H / VXR-9000U-H FM R
ONNECTORS
TX Indicator
This LED glows red when the repeater is transmit-
ting.
Numeric Display
This display consists of two 7-segment LEDs, indi-
cating the channel number during normal operation.
If an abnormal condition arises, an error code will be
displayed:
D
D
ISPLAY
01 - 32
Channel Number
Clone Active
PC
UL
PLL Unlock
High temperature in PA Unit
HI
Scan Active
SC
Front Panel Keys are Locked
LC
PTT key is Disabled
E1
Cooling Fan is Disabled
E2
E5
Low Voltage in Backup Battery
PA Unit Abnormality
E7
Contact your Dealer
E3, E4, E6, E9
BUSY Indicator
This LED glows green when the receiving channel
is busy.
Speaker
The internal speaker is located here.
EPEATER
ESCRIPTION
O
M
PERATING
ANUAL
Advertisement
Table of Contents
