Installation; Break In; Installing On A Wall - MartinLogan ELECTROMOTION FX2 User Manual

Fig. 4
Fig. 5A
i
nstallation
WARNING! Installation other
than that described in the body
of this document requires specif-
documentation from MartinLogan.

BREAK IN

Allow approximately 72 hours of break-in at 90
dB (moderate levels) before any critical listening.
Note:.This speaker is not magnetically shielded
and therefore should not be placed directly beside
or atop a CRT television.

INSTALLING ON A WALL

Note: These instructions assume the mounting
surface is standard wood frame and sheet rock
construction. If you wish to mount to another type
of surface, consult a bonded contractor.
Required.hardware.(included):
• (1) Installation template
• (1) Wall bracket
• (1) Shoulder bolt
• (2) Rubber bumpers
Fig. 5B Fig. 5C
ic
5