Opener Installation; Hoisting Opener - GarageAce S3 Owner's Manual

3.4. Opener installation

3.4.1. Opener connection
Assemble opener as shown
in Figure 7, fasten four anti-loose
screws(provided) M8 × 16.
Figure 7
3.4.2. C-type slide rail assembly and clutch cord fixing
As shown in Figure 8, fasten the clutch rod
together with small head screws(provided) M6x20,
ensure that it is solid and reliable. Tie the rope on to
the clutch rod.
3.4.3. Lifting Plate Connection
Connect lifting plate as shown in Figure 9, L is about
100mm, keep the bolts loose in order to adjust the L length.
Figure 8
M8x20
M8
Figure 10
Figure 9
3.5. Hoisting the opener
3.5.1. Install the front bracket
As shown in Figure 10, determine the installation location
of the front bracket, then fix it on the door head with M8 bolts.
Note: Make sure the strength of the front bracket mount is strong.
3.5.2. Install perforated bracket
Cut out a 400-450mm matching bracket, locate it as shown in
Figure 11, then fix it on the ceiling with M8 bolts.
Figure 11
Note: Make sure the strength of the perforated bracket is strong.
4